bgb@X270:~/Git/BusPirate5-firmware/build6$ BusPirate
[10:08:07.614] tio v2.7
[10:08:07.614] Press ctrl-t q to quit
[10:08:07.615] Connected
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 102
[BPIO] Packet Type: 2
[I2C] Speed 100000 Hz
[Config Request] Mode changed to 'I2C'
[Config Request] PSU current limit override enabled
[Config Request] PSU Voltage: 3.300000, Current: 0.000000, Override: true
[Config Request] Power supply enabled
[Config Request] Pull-up resistors enabled
[Send Packet] Length 36
[Send Packet] COBS encoded buffer length: 38
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x00
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x01
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x02
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x03
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x04
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x05
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x06
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x07
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x08
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x09
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x0A
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x0B
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x0C
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x0D
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x0E
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x0F
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x10
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x11
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x12
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x13
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x14
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x15
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x16
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x17
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x18
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x19
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x1A
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x1B
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x1C
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x1D
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x1E
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x1F
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x20
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x21
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x22
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x23
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x24
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x25
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x26
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x27
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x28
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x29
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x2A
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x2B
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x2C
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x2D
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x2E
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x2F
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x30
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x31
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x32
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x33
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x34
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x35
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x36
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x37
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x38
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x39
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x3A
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x3B
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x3C
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x3D
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x3E
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x3F
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x40
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x41
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x42
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x43
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x44
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x45
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x46
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x47
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x48
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x49
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x4A
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x4B
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x4C
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x4D
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x4E
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x4F
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x50
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x51
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x52
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x53
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x54
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x55
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x56
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x57
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x58
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x59
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x5A
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x5B
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x5C
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x5D
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x5E
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x5F
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x60
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x61
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x62
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x63
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x64
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x65
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x66
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x67
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x68
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x69
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x6A
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x6B
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x6C
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x6D
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x6E
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x6F
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x70
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x71
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x72
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x73
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x74
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x75
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x76
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x77
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x78
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x79
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x7A
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x7B
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x7C
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x7D
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x7E
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x7F
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x80
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x81
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x82
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x83
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x84
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x85
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x86
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x87
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x88
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x89
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x8A
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x8B
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x8C
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x8D
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x8E
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x8F
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x90
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x91
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x92
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x93
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x94
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x95
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x96
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x97
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x98
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x99
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x9A
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x9B
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x9C
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x9D
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0x9E
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0x9F
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xA0
[I2C] STOP
[Send Packet] Length 48
[Send Packet] COBS encoded buffer length: 50
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xA1
[I2C] Reading 1 bytes
[I2C] STOP
[Data Request] Returning read 1 bytes
[Send Packet] Length 52
[Send Packet] COBS encoded buffer length: 54
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xA2
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xA3
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xA4
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xA5
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xA6
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xA7
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xA8
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xA9
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xAA
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xAB
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xAC
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xAD
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xAE
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xAF
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xB0
[I2C] STOP
[Send Packet] Length 48
[Send Packet] COBS encoded buffer length: 50
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xB1
[I2C] Reading 1 bytes
[I2C] STOP
[Data Request] Returning read 1 bytes
[Send Packet] Length 52
[Send Packet] COBS encoded buffer length: 54
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xB2
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xB3
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xB4
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xB5
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xB6
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xB7
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xB8
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xB9
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xBA
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xBB
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xBC
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xBD
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xBE
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xBF
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xC0
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xC1
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xC2
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xC3
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xC4
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xC5
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xC6
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xC7
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xC8
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xC9
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xCA
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xCB
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xCC
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xCD
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xCE
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xCF
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xD0
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xD1
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xD2
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xD3
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xD4
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xD5
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xD6
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xD7
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xD8
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xD9
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xDA
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xDB
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xDC
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xDD
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xDE
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xDF
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xE0
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xE1
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xE2
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xE3
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xE4
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xE5
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xE6
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xE7
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xE8
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xE9
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xEA
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xEB
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xEC
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xED
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xEE
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xEF
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xF0
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xF1
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xF2
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xF3
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xF4
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xF5
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xF6
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xF7
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xF8
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xF9
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xFA
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xFB
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Writing 1 bytes
[I2C] Write address 0xFC
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 80
[Send Packet] COBS encoded buffer length: 82
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 66
[BPIO] Packet Type: 3
[Data Request] Start main condition: true
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 1
[Data Request] Bytes to read: 1
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Read address 0xFD
[Data Request] Protocol request failed
[Data Request] Error: Protocol request failed
[Send Packet] Length 84
[Send Packet] COBS encoded buffer length: 86
[BPIO] COBS delimiter found, stopping read
[BPIO] Flatbuffer data read complete, total length: 50
[BPIO] Packet Type: 3
[Data Request] Start main condition: false
[Data Request] Start alternate condition: false
[Data Request] Bytes to write: 0
[Data Request] Bytes to read: 0
[Data Request] Stop main condition: true
[Data Request] Stop alternate condition: false
[I2C] Performing transaction
[I2C] START
[I2C] Reading 0 bytes
[I2C] STOP
[Send Packet] Length 48
[Send Packet] COBS encoded buffer length: 50
scan
I2C address search:
0x50 (0xA0 W) (0xA1 R)
0x58 (0xB0 W) (0xB1 R)

Found 4 addresses, 2 W/R pairs.

I2C> i

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that may cause undesired operation.

Bus Pirate 5 REV10
https://BusPirate.com/
Firmware main branch @ d5b4754 (Dec  7 2025 15:28:26)
RP2040 with 264KB RAM, 128Mbit FLASH
S/N: 32104F0B33CC62E4
Storage:   0.10GB (FAT16 File System)

Configuration file: Loaded
Active binmode: BPIO2 flatbuffer interface
Available modes: HiZ 1WIRE UART HDUART I2C SPI 2WIRE 3WIRE DIO LED INFRARED JTAG
Active mode: I2C
 I2C speed: 100 kHz
 Clock stretching: OFF 

Display format: Auto
Data format: 8 bits, MSB bitorder
Pull-up resistors: ON
Power supply: ON (3.3V/3.29V)
Current limit: OK (7.9mA/0.0mA)
Frequency generators: OFF

1.Vout  2.IO0   3.IO1   4.IO2   5.IO3   6.IO4   7.IO5   8.IO6   9.IO7   10.GND
7.9mA	SDA	SCL	-	-	-	-	-	-	GND	
3.3V	3.1V	3.2V	3.3V	3.2V	3.2V	3.3V	3.2V	3.3V	GND

I2C>