blueTag (JTAGulator alternative) port to Bus Pirate

[ian]

Infrared binary mode (AnalysIR, IRMAN)

Measuring frequency modulation has become somewhat of a pain. I think the easiest thing may be to build a mini logic analyzer and sample after the first falling edge. Then we’ll read those bytes out and look for the 1->0->1 transition and count the number of time units. [image] Depending on how the IR carrier burst in implemented, the first and last bit of carrier may not be a full cycle. So we can wait on the first two transitions to make sure we have a good start point. [image] This is wha…

I think I have it figured out. Want to get the Infrared adapter going. So very close.